HDD Housing & Accessories
-
- Connects one M.2 port (M key) into one PCI-E x4 interface
- Connects a second M.2 port (B key) into SATA 6G interface
- Supports two M.2 SSD simultaneously
- Supports PCI-E interface (M key) at up to 32Gbps
- Supports SATA interface (B key) at up to 6Gbps
- No driver installation required
Learn More
-
- The durable Aluminium casing promises effective heat dissipation
- Support mSATA SSD converted into a standard 2.5" SATA interface
- Added protection for your mSATA SSD with enclosed housing
- The speed and other properties is not changed, only form conversion interface
- Compatible mSATA SSD Type: 30x50mm
- Size: 100 mm*70 mm*7 mm
Learn More
-
- The durable Aluminium casing promises effective heat dissipation
- Support specified M.2 SSD converted into a standard 2.5" SATA interface
- Added protection for your M.2 SSD with enclosed housing
- The speed and other properties is not changed, only form conversion interface
- Size: 100 mm*70 mm*7 mm
Learn More
-
- Designed for single sided M.2 2280 SSD
- Cooling down M.2 SSD to a safe temperature
- Low profile design and works with desktop computers and PS5
- Aluminium groove design provides more heat dissipation area
- Provides 10° C - 20° C all around cooling (Varies depending on environment)
- Helps prevent overheating and throttling, improving the SSD performance
- Silicone thermal pads provide good thermal conductivity
Learn More
-
- SuperSpeed USB 3.0 to SATA 15+7 pin connector cable
- Backwards-Compatible with USB 2.0 or 1.1
- Supports 2.5" SATA HDD/SDD with SATA I/II/III interface
- Powered directly from the USB port for 2.5" SATA HDD/SSD
- Hot-swappable, plug and play, no drivers needed
- UASP mode boost speed up to 70% compared to regular USB 3.0
- Compact and lightweight make it is easy to collect and carry
- LED light indicates Power and Activity status
Learn More
-
- USB 3.0 (USB 3.1 Gen1) Interface, transfer rates up to 5Gbps
- Supports 2.5" SATA HDD/SDD with SATA I/II/III interface
- Compact and lightweight make it is easy to carry
- Backwards-Compatible with USB 2.0 or 1.1
- Powered directly from the USB port for 2.5" SATA HDD/SSD
- Hot-swappable, plug and play, no drivers needed
- UASP mode boost speed up to 70% compared to regular USB 3.0
- LED light indicates Power and Activity status
Learn More
-
- mSATA + M.2 SSD 2 in 1 Combo Adapter
- Convert a mSATA or M.2 SSD to SATA 3 interface
- On board mSATA and M.2 Switch
- Plug and play, no drivers required
- Circuit board Size: 97x65x5mm
Learn More
-
- mSATA + M.2 SSD 2 in 1 Combo Adapter
- Detachable USB 3.0 cable, with SATA and USB 3.0 dual interface
- LED indicates power and activity status
- Support SATA Revision 3.2
- Support mSATA SSD
- Support B Key or B+M Key M.2 SSD
Learn More
-
- mSATA + M.2 SSD 2 in 1 Combo Adapter
- Convert a mSATA or M.2 SSD to USB 3.0
- On board mSATA and M.2 Switch
- Detachable USB 3.0 cable
- USB 3.0 (USB3.1 Gen 1) interface up to 5Gbps data transfer rate
- Plug and play, no drivers required
- Compatible with Windows 7 and above, Mac OS 10.6 and above
Learn More
-
- USB 3.0 (USB 3.2 Gen1) Interface, transfer rates up to 5Gbps
- With external power adapter for 3.5" hard drives
- Supports 2.5" and 3.5" SATA HDD/SDD with SATA I/II/III interface
- Portable and lightweight make it is easy to carry
- Backwards-Compatible with USB 2.0 or 1.1
- Hot-swappable, plug and play, no drivers needed
- UASP mode boost write speed up to 40% compared to regular USB mode
- LED light indicates Power and Activity status
Learn More
-
- Flexibility of connectivity and hot-swap capability to all your storage drives
- Connect 2.5", 3.5", 5.25" SATA or IDE drives thru the latest USB 3.0 interface
- Power Adapter included for using 3.5" or 5.25" drives outside system
- Built-in IDE power connector, for easy access of 3.5" IDE HDD
- No external power required for 2.5" SATA or IDE HDD
- With LED activity indicator, On/Off switch ensures easy control of drives
- Support accessing 2 drivers (IDE+SATA) simultaneously
- Transfer Rates Up to 5 Gbps with USB 3.0, 480 Mbps with USB 2.0
- Downwards compatible with USB 2.0
- Hot-swappable, plug and play, no drivers needed
- Supports 2.5" & 3.5" SA TA or PATA(IDE) Hard Drives and SSD
- Supports 5.25" Optical CD/DVD/Blu-ray Drives
- Support Windows XP and above, Mac OSX 10.6 and above
Learn More
-
- Flexibility of connectivity and hot-swap capability to all your storage drives
- Connect 2.5", 3.5", 5.25" SATA or IDE drives thru the latest USB 3.0 interface
- Power Adapter included for using 3.5" or 5.25" drives outside system
- Built-in IDE power connector, for easy access of 3.5" IDE HDD
- No external power required for 2.5" SATA or IDE HDD
- With LED activity indicator, On/Off switch ensures easy control of drives
- Support accessing 2 drivers (IDE+SATA) simultaneously
- Transfer Rates Up to 5 Gbps with USB 3.0, 480 Mbps with USB 2.0
- Downwards compatible with USB 2.0
- Hot-swappable, plug and play, no drivers needed
- Supports 2.5" & 3.5" SA TA or PATA(IDE) Hard Drives and SSD
- Supports 5.25" Optical CD/DVD/Blu-ray Drives
- Support Windows XP and above, Mac OSX 10.6 and above
Learn More
-
- Dual Protocol support for both NVMe and SATA M.2 SSD
- Convert M.2 SSD (M Key or B+M Key) to USB-C
- USB 3.2 Gen 2 interface up to 10Gbps transfer rate
- Cable style adapter for easy swap and access of multiple M.2 SSDs
- Supports USAP for faster data transfer speed and maximum performance
- Supports TRIM command for improved data writing to extend SSD life
- Plug and play, no driver required
- LED indicator for power and activity status
Learn More
-
- 2-IN-1 USB adapter with SATA and M.2 sockets
- Supports NVMe and SATA M.2 SSD
- Supports 2.5" and 3.5" SATA HDD/SDD with SATA I/II/III interface
- Toggle button to quickly switch between SATA and M.2
- USB 3.2 Gen2 interface support up to 10Gbps data transfer rate
- Plug and play, no driver required
- Supports USAP for faster data transfer speed and maximum performance
- Supports TRIM command for improved data writing to extend SSD life
- With external power adapter for 3.5" hard drives
- LED light indicates Power and Activity status
Learn More
-
- Tool Free allow to mount or unmount 3.5” Hard Drive without Tools and Screws in Seconds
- Holds a 3.5" SATA drive in a front accessible 5.25" bay
- Trayless design, drives are not mounted into separate trays/enclosures
- Supports 3.5" form factor SATA hard drives
- Plug-and-Play and Hot-Swap compatible (for AHCI mode)
- Stylish brushed Front Panel Design
- Ideal for environments where drives need to be replaced/removed regularly
Learn More
-
- Designed for direct insertion of two 2.5 inch or 3.5 inch SATA HDD/SSD
- USB 3.0 SuperSpeed Interface, transfer rates up to 5Gbps
- Backwards-Compatible with USB 2.0, transfer rates up to 480Mbps
- Low profile design with SATA drive bay lid, which is also the HDD holder when opened
- LED light indicates Power and Activity status
- Hot-swappable, plug and play, no drivers needed
- Support UASP (USB Attached SCSI Protocol)
- Support offline clone, easy installation, computer-independent duplicating/cloning without computer support
- Dimensions: 133mm x 125mm x 50mm
- Compatible with Windows XP and above (32/64-bit), Mac OS 10.4 and above
Learn More
-
- Designed for direct insertion of two 2.5 inch or 3.5 inch SATA HDD/SSD
- USB 3.0 SuperSpeed Interface, transfer rates up to 5Gbps
- Backwards-Compatible with USB 2.0, transfer rates up to 480Mbps
- Solid aluminium casing with glossy ABS top panel, elegant and stylish
- LED light indicates Power and Activity status
- Hot-swappable, plug and play, no drivers needed
- Support offline clone, easy installation, computer-independent duplicating/cloning without computer support, high efficiency
- Reliable and high watts DC power supply, so that a stable energy supply is guaranteed
- Compatible Operating Systems: Windows XP and above (32/64-bit), Mac OS 10.10 and Above, Linux.
Learn More
-
- Designed for direct insertion of two 2.5 inch or 3.5 inch SATA HDD/SSD
- USB 3.0 SuperSpeed Interface, transfer rates up to 5Gbps
- Backwards-Compatible with USB 2.0, transfer rates up to 480Mbps
- Solid aluminium casing with glossy ABS top panel, elegant and stylish
- LED light indicates Power and Activity status
- Hot-swappable, plug and play, no drivers needed
- Support offline clone, easy installation, computer-independent duplicating/cloning without computer support, high efficiency
- Reliable and high watts DC power supply, so that a stable energy supply is guaranteed
- Compatible Operating Systems: Windows XP and above (32/64-bit), Mac OS 10.10 and Above, Linux.
Learn More
-
- Designed for direct insertion of one 2.5 inch or 3.5 inch SATA HDD/SSD
- USB 3.0 SuperSpeed Interface, transfer rates up to 5Gbps
- Backwards-Compatible with USB 2.0, transfer rates up to 480Mbps
- Touch Control ON/OFF switch
- LED light indicates Power and Activity status
- Hot-swappable, plug and play, no drivers needed
- Stable and reliable high watts DC power source for high capacity hard drivers
- Compatible Operating Systems: Windows XP and above (32/64-bit), Mac OS 10.4 and above, Linux.
Learn More
-
- Compatible with 3.5 inch or 2.5 inch SATA HDD/SSD
- USB 3.2 Gen 1 (USB 3.0) Interface, transfer rates up to 5Gbps
- Backwards compatible with USB 2.0, transfer rates up to 480Mbps
- Attractive LED lighting base with multi-color breathing effect
- Hot-swappable, plug and play, no drivers needed
- Support UASP (USB Attached SCSI Protocol)
- Auto sleep function after 10 minutes of inactivity
- Support one touch backup for Windows system, front OTB button
- Compatible with Windows XP and above (32/64-bit), Mac OS 10.4 and above
Learn More
-
- Dual Bay SATA dock for direct insertion of two 2.5" or 3.5" SATA HDD/SSD
- Support offline clone, high efficiency duplicating/cloning without computer support
- Top to bottom full Aluminium-alloy design offers effective heat dissipation
- 3 Port USB 3.0 Hub to expand more available USB ports for peripherals
- 1 Port 2.1A charger for fast charging your phone or tablet
- USB 3.0 SuperSpeed Interface, transfer rates up to 5Gbps
- Backwards-Compatible with USB 2.0, transfer rates up to 480Mbps
- ON/OFF power switch
- LED light indicates Power and Activity status
- Hot-swappable, plug and play, no drivers needed
- Compatible with Windows XP and above (32/64-bit), Mac OS 10.4 and above
Learn More
-
- Dual Bay NVMe M.2 SSD docking, support NVMe M.2 SSD only
- Access data from two NVMe M.2 slots simultaneously
- Support multi-LUN (logical unit number), each slot has a separate drive letter
- USB 3.2 Gen2 interface support up to 10Gbps data transfer rate
- Support offline clone, standalone duplicating/cloning without host computer
- Compact design, save and tidy your desktop space
- LED light indicates Power and Activity status
Learn More
-
- One M.2 slot for NVMe M.2 SSD
- One SATA slot for 3.5" or 2.5" SATA HDD/SSD
- USB 3.2 Gen2 interface support up to 10Gbps data transfer rate
- Support multi-LUN (logical unit number), each slot has a separate drive letter
- Access data from NVMe M.2 and SATA slots simultaneously
- Support offline clone, standalone duplicating without host computer
- Clone direction switch allows two-way clone between NVMe M.2 and SATA drives
- Supports USAP for faster data transfer speed and maximum performance
- Supports TRIM command for improved data writing to extend SSD life
- Plug and play, no additional driver software required
- LED light indicates Power and Activity status
Learn More
-
- Stylish matt surface prevents noticeable fingerprint and light scratches
- Compatible with 7mm and 9.5mm laptop 2.5" SATA HDD/SSD
- SuperSpeed USB 3.0 Interface, backwards compatible with USB 2.0/1.1
- Easy installation allow to mount Hard Drive in seconds
- Hot-swapping, plug and play, no additional driver needed
- UASP mode boost speed up to 70% compared to regular USB 3.0
- LED light indicates power and activity status
Learn More
-
- Stylish matt surface prevents noticeable fingerprint and light scratches
- Compatible with 7mm and 9.5mm laptop 2.5" SATA HDD/SSD
- SuperSpeed USB 3.0 Interface, backwards compatible with USB 2.0/1.1
- Easy installation allow to mount Hard Drive in seconds
- Hot-swapping, plug and play, no additional driver needed
- UASP mode boost speed up to 70% compared to regular USB 3.0
- LED light indicates power and activity status
Learn More
